0102030405
Water-based Screen Cleaning Machine
01
7 Jan 2019
When the set cleaning process is completed, it will automatically stop and reset, so as to realize the next workflow.This machine is very convenient for operators to clean the screen board, and the chief mate can improve the production efficiency and quality. It is a new type of high-performance automatic cleaning equipment.The equipment is rinsed with water-based liquid detergent and DI water. The mechanism adopts high-precision linear guide rail, sliding block and ball screw rod, and is driven by a stepping motor to move left and right, ensuring accurate reset every time and long service life. The operating spray bar moves to and fro from left to right for spraying, and local areas can be selected for targeted spraying.
01
7 Jan 2019
High pressure spray system specially used for water-based cleaning fluid to clean screen board, misprint board, PCB/PCBA and other processes.
Double liquid tanks are equipped with heating system to meet the requirements of cleaning, rinsing and hot air drying.
Process flow: cleaning - chemical isolation - rinsing (open-loop/closed-loop) - drying.
Equipped with advanced full-automatic touch screen operation software, program files are saved, used and simplified.
The system counting function can automatically accumulate the number of cleaning screen boards and the number of cycle filtering.
The liquid and pump pressure can be displayed through the panel pressure gauge, and the equipment operation status can be fed back in time.
The spray pressure is monitored by a pressure sensor. If the pressure range is set, an alarm will be given.
Technical Parameters
Technical Parameters | |
Machine dimensions (mm) | L1600*W1200*H1850mm |
Applicable screen size (mm) | L750 * W750 * H40 (max) |
Power supply | AC380V 50HZ |
Total power | 30KW |
Range of electric resistance tester | 0~18MΩ |
Air source | 0.45~0.7Mpa |
Exhaust port | Ø125(W)*30MM(H) |
Cleaning tank volume | 50L*2PCS(max) |
Optimal liquid consumption | 40L*2PCS |
Detergent isolation time | 40S |
Cleaning time | 3~5Min |
Rinsing time | 2~3Min |
drying time | 3~6Min |
Cleaning and rinsing methods | Left and right movable high-pressure liquid spray cleaning |
Drying method | High pressure hot air switch can be selected from super model |
Rinsing times | 1-99 times (settable) |
Cleaning liquid filtration | oneμM (filter microparticles: red glue and pollutants) |
Rinsing liquid filtration | oneμM (filter microparticles: red glue and pollutants) |
Liquid heating temperature | Room temperature~60 ℃ |
DI Water Supply | 30~60L/min |
DI water pressure | ≤0.4Mpa |
DI water inlet and outlet connecting pipe | 1 inch |
noise | Less than 50 dB |
Details
FAQ
Q: What items can be used for cleaning?
A: SMT/ SOP、Steel screen/printing glue screen、Printing scraper、PCB/PCBA.
Q: What is the cleaning process?
A: Place screen → parameter setting → diluent heating → draw to spray tank → cleaning → diluent recovery → rinse water addition → rinsing → hot air drying