Products

Description

The DEK NeoHorizon 03ix shines with more than

a new design. It’s modular the interior is much improved and highly reliable. Whether in high-mix contract manufacturing or high-volume applications with high throughput requirements – the DEK NeoHorizon iX is the right printing platform.

Features  

• Stinger Camera mounted board dispense option 
• Paste roll height monitoring
• Squeegee pressure feedback
• Semi Automatic Stencil Load
• DEK Cyclone under screen cleaner option
• Adjustable screen mount

Other function:    

Auto Fiducial Alignment
Auto Rail Width
Programmable Beacon
Networking
2D Inspection function
Standard SMEMA

Voltage:    AC 110V–220V  50-60Hz
Machine weight:    700Kg
Machine Size:    L1400xD1800xH1500mm

Introduction

The insulation furnace design lowers the furnace shell temperature by 10-20 degrees, reducing the working environment temperature effectively.

A 15% increase in heat transfer efficiency meets lead-free process demands for complex, larger welding products.

Reinforce the main boom to prevent guide rail deformation, board sticking, or dropping.

The furnace's closed design protects nitrogen, keeping oxygen levels as low as 150ppm, with minimal nitrogen use (20-22m3/H in 300-800ppm oxygen).

95% machine materials are recyclable.

Enhanced cooling structure filters or recycles most exhaust gas back into the furnace, cutting heat loss and improving flux recovery.

Double rail setup boosts production efficiency, trims energy use, and lowers costs.

Working furnace temperature is low, minimizing heat loss.

Description:

• Highcapacity, normal working conveyor speed reached160cm/min. Low energy consumption, low cost. Special for the high-speed production and high density PCBA technology;
• Powerful temperature control, setting and actual temperature difference within 1.0℃, unload and load temperature fluctuates within 1.5℃; Rapid temperature raising ability, temperature difference between neighboring zone 100℃;
• The newest insulation technique and new chamber design ensured that surface temperature is room temperature +5C;
• N²quality controllable in whole process, O² density closed-loop controlled independently at 50-200ppm in every zone;
• The newest cooling technology, optional double side multi-cooling zone, the effective cooling length is 1400mm, make sure fast cooling of the product to the lowest output temperature;
• New two level flux separation system with multi-zone collection which make separation thoroughly, so that the maintenancetime and frequency was reduced significantly;
• Dual line in different speed, one set cost, double capacity, energy saving 65%.

Description:

• All-purpose surface mounter with the highest speed in its class brings 1head solution evolution to a whole new level!
• World’s fastest mounting speed in its class; 5% faster than the YSM20.
  Featuring a new wide-scan camera with improved component adaptability.
• Optional features improving line operating rate without stopping the machine

Description

YAMAHA YSM 10 is a High-Speed Compact Modular mounter achieving both world’s fastest speed and versatility in its class.

Description

• Yamaha YS24 Series Mounter is divided into Yamaha YS24 and Yamaha YS24X models,
• Yamaha YS24/YS24X supports L700×W460mm ultra large substrates
• Yamaha's unique dual placement table, dual rail system.
• YS24 production per unit area of 340,000 CPH / square meter.

Description:

Yamaha YS12 SMT Pick and Place Machine is a compact high-speed SMT chip mounter machine. Yamaha YS12 is applicable to PCB with sizes from  L510*W460mm to L50*W50mm. This compact and high-speed mounter can mount 0402 (Metric base) to 32*mm components. 

Introduction:

 The NPM-W2 amplifies the original NPM-W capabilities with a 10% throughput boost and 25% more accuracy. It also integrates new innovations like our incomparable Multi Recognition Camera. Combined, these features extend the component range down to the 03015mm microchip, yet preserve capability up to 120x90mm components up to 40mm tall and nearly 6” long (150mm) connectors.

Featuring a revolutionary Multi Recognition Camera that uniquely combines three separate imaging capabilities into a single system: 2D alignment, component thickness inspection, and 3D coplanarity measurement. 

Introduce

The Panasonic chip mounter NPM-TT2complements the NPM platform with front and rear tray towers plus feeder slots for tape reels. Its twin tray configuration

enables independent mode, dual- lane production. Additionally, its dual-lane board handling allows increased production of one or more products simultaneously; yet,

easily converts to single-lane mode for larger board sizes.